Make sure to keep bolts loose when doing this build. Otherwise parts may not line up.
Found out this will not work. I ended up mounting the brass Standoffs on the stepper motor first. Much easer!!!! Also, because the threads are too long for the stepper motor and I didn't want to use a bunch of washers, I put a nut on each standoff first to take up the extra thread. This method has benefits if you need to adjust the tilt of this particular stepper motor.
Don't forget the spring washer like I did. It's not in Shapeoko build diagram but does reference the spring in the text.
No comments:
Post a Comment